The MUX16 module is a 16 channel multiplexer extension for use with the EmStat3 potentiostat module. Picture represents MUX16 multiplexer in combination with the EmStat3 module.
The MUX16 multiplexer is used with 2 electrode sensors or cells with up to 16 channels. It can have a shared counter and reference electrode, or each working electrode with each its own combined reference/counter electrode. So in short it can either switch:
- 16x WE, 16x RE+CE joint together
- or 16x WE with fixed RE and CE
The MUX16 can be mounted directly to the EmStat3 potentiostat module as shown below. Or it can be connected via short wires or flatcable.
The MUX16 module can be mounted directly on the EmStat Development board. Connections to different cells can be made using the screw terminals on the development board.
The available libraries for software development are also made compatible with the MUX16 module.
It is not possible to apply a potential simultaneously to more than one sensor or cell each with three electrodes. This requires a multipotentiostat, one potentiostat for each channel. This is however possible with two electrode sensors or cells, so when combined counter and reference electrodes are applied.